mXDJ

mXDJ is MDT’s rugged outdoor data acquisition system with CAN bus inputs to communicate with engines and transmissions via J1939 for fault code tracking. At the core of this product is a German made controller (STW) that has an average mean-time-between-failure (MTBF) of over 50 years

KEY FEATURES

WEATHERPROOF

 Weather proof, stainless steel NEMA enclosure (24″x24″x8″)

PROGRAMMABLE CONTROLLER

STW Industrial Programmable Automation Controller (50 year MTBF, IP69X, single 81 pin industrial anti-vibration connector)

LOCAL PHYSICAL CONTROLS

Local physical controls for ignition, engine start, instant neutral, transmission shift, throttle & E-Kill

SYSTEM SPECIFICATIONS

– 4x 4-20mA Analog input channels (2 IS)
– 12x Multi-function input channels (analog or frequency)
– 2x Encoder channels
– 6x Relay outputs, 2 amp (accessed through multi conductor cable)
– 15x Multi-function inputs (accessed through multi conductor cable)
– 2x Deutsch connectors for two engines (CAN/J1939 Network)
– 1x Ethernet Bayonet RJ45 connector
– 3x 6 Pin bayonet connectors for Ethernet communication
– 1x Military connector for power in (24VDC)
– 2x Military connector for power out for modules (24VDC)
– 1x Uninterrupted Power Supply for 24V system
– Intelligent power controller (24VDC Input ONLY)

SYSTEM REQUIREMENTS

Power input
– 24VDC, 10A
– Main power supply must not exceed +/- 10% of the nominal voltage
– Ignition or switch signal (cable supplied)

STORAGE | OPERATING LIMITS

Storage temperature
-40°C to 70°C (-40°F to 158°F)
Operating temperature
-40 °C to 45°C (-40°F to 113°F)

COMPATIBLE SOFTWARE