The mCTU is MDT’s coiled tubing data acquisition system. A large number of I/O in a small form factor makes this system capable of handling the increased input requirements of a modern coil tubing truck.
KEY FEATURES
DISPLAY
Performs data acquisition, tubing analysis and fatigue analysis each with a dedicated desktop display
POWER
Wide input 9 – 30 VDC power
INPUTS
All standard inputs are multi function and are capable of resolving voltage (0 to 5, 10, or 40 VDC), current (0 to 20 mA), and frequency (0 to ~5 kHz, amplified square wave preferred) inputs as configured by software
FORM FACTOR
Small form-factor
SYSTEM SPECIFICATIONS
– Powder-Coat Enclosure (16 L x 14 W x 7” H)
– Both Intrinsically Safe and non-I.S. versions available
– 16x 6‐pin bayonet multi-function input channels (14 MFI + 2x 4‐20mA channels if I.S. option purchased)
– 2x 6‐pin bayonet encoder channels (1x I.S. and 1x non‐I.S. if I.S. option purchased)
– 1x RJ45 Ethernet circular connector
– 2x 6‐pin bayonet Ethernet connectors
– 1x power output connector (regulated 24VDC)
– 1x PC power connector (regulated 24VDC)
SYSTEM REQUIREMENTS
Power input
– 24VDC, 10A
– Main power supply must not exceed +/- 10% of the nominal voltage
– Ignition or switch signal (cable supplied)
STORAGE | OPERATING LIMITS
Storage temperature
-40°C to 70°C
(-40°F to 158°F)
Operating temperature
-40°C to 50°C
(-40°F to 122°F)
COMPATIBLE SOFTWARE
DATA ACQUISITION SOFTWARE
